Directory of image this file is from
This file as a plain text file

$26



        RX01/RX02 PERFORMANCE EXERCISER


        SYSTEM TYPE SELECTED: #1

        CONFIGURATION: #6

        SCRATCH FLOPPY DISKETTES MUST BE INSTALLED IN ALL DRIVES BEFORE
        STARTING TESTS.

        ONCE  THE TEST IS STARTED,  TYPING  CTRL-C  WILL STOP THE TEST.
        AFTER CTRL-C,  AN INSTRUCTION  MENU WILL BE DISPLAYED.   TYPING
        CTRL-C  IS  THE  ONLY  WAY  TO  STOP THE TEST AFTER THE TEST IS
        STARTED.

        >TYPE "R" TO RETURN TO THE TEST CATEGORY SELECTION MENU.
        >TYPE <RETURN> TO START THE TEST.



&R
%
#1
WS78
WS100 OR WS102
WS81, WS82, WS211, WS212, OR WS202
WS200
#6
UNIT A ONLY - RX01
UNIT A ONLY - RX02


UNIT- A AND B        DRIVE TYPE- RX01
UNIT- A AND B        DRIVE TYPE- RX02
UNIT A - RX01        UNIT B - RX02
UNIT A - RX02        UNIT B - RX01
$27






        #1 PERFORMANCE EXERCISER

        CONFIGURATION: #6

        TEST COMPLETE: CTRL-C EXIT USED FROM KEYBOARD.

        REMOVE THE SCRATCH DISKETTE(S) FROM THE DRIVE(S) AND INSERT
        THE DIAGNOSTIC DISKETTE IN DRIVE 0.  AFTER COMPLETING THIS,
        PRESS  <RETURN>.   CONTROL  WILL THEN BE TRANSFERRED TO THE 
        TEST CATEGORY SELECTION MENU.

        > WHEN FINISHED, PRESS <RETURN>.





&
%
#1
WS78
WS100 OR WS102
WS81, WS82, WS211, WS212, OR WS202
WS200
#6
UNIT A ONLY - RX01
UNIT A ONLY - RX02


UNIT- A AND B        DRIVE TYPE- RX01
UNIT- A AND B        DRIVE TYPE- RX02
UNIT A - RX01        UNIT B - RX02
UNIT A - RX02        UNIT B - RX01
$06







        WS200 MEMORY MANAGEMENT TEST

        FOR THE SYSTEM BEING TESTED,
        CHOOSE A MEMORY CONFIGURATION:

        TYPE:
                1 -  64K

                2 -  96K

                3 -  128K

                R -  TO RETURN TO THE TEST CATEGORY SELECTION MENU.




&:123R%
$07



        WS200 MEMORY MANAGEMENT TEST

        MEMORY SIZE:   #5 SECONDS TEST TIME
                                      PER SUCCESSFUL TEST PASS.

        AFTER STARTING,  THIS TEST MAY BE STOPPED BY RE-BOOTING
        THE SYSTEM.   AFTER BOOTING,  THE SYSTEM TYPE SELECTION
        MENU WILL BE DISPLAYED.  AT THAT TIME, SELECT THE WS200
        OPTION AND THEN SELECT ANOTHER TESTING CATEGORY.

        END OF PASS  MESSAGES WILL BE DISPLAYED ON THE  CONSOLE
        AS SUCCESSFUL PASSES ARE COMPLETED.



        >TO START THE TEST, PRESS <RETURN>.

        >TO RETURN TO THE TEST CATEGORY SELECTION MENU, TYPE "R".



&
R%
#5
32K WORDS  - 40
64K WORDS  - 50
96K WORDS  - 60
128K WORDS - 70
$08






                  WS200 MEMORY MANAGEMENT TEST
                  ----------------------------


        END OF TEST.
        CONTROL-C ENTERRED.



        TO RETURN TO THE TEST CATEGORY SELECTION MENU, PRESS <RETURN>.









&
R%
$10




                    #1 CPU EXERCISER


           THIS PROGRAM WILL EXERCISE THE FOLLOWING SUBSYSTEMS:

                                 THE CPU
                          THE "OPTION ONE BOARD"
                           THE REAL TIME CLOCK

        WHEN THE TEST IS STARTED,  AN INCREMENTING  CHARACTER PATTERN
        WILL FILL THE SCREEN.   THIS CHARACTER  PATTERN WILL CONTINUE
        AS LONG AS THE TEST IS RUNNING.  THERE WILL BE NO END OF PASS
        MESSAGE.   FIVE MINUTES OF RUN TIME IS SUFFICIENT TO TEST THE
        CPU.  TO STOP THE TEST, ENTER A CTRL-C.   AFTER THE CTRL-C IS
        ENTERED, YOU WILL BE ASKED TO RESELECT A SYSTEM TYPE.

        >PRESS <RETURN> TO START THE TEST.
        >TYPE "R" TO RETURN TO THE TEST CATEGORY SELECTION MENU.


&
R%
#1
WS78
WS100 OR WS102
WS81, WS82, WS211, WS212, OR WS202
WS200
$30







        VT78 CPU TEST
        -------------

        CHOOSE A PRINTER CONFIGURATION:

        TYPE:
                1 -  IF AN LA180 PRINTER IS CONNECTED.

                2 -  IF AN "LQP" LETTER QUALITY PRINTER IS CONNECTED.

                3 -  IF NEITHER PRINTER IS CONNECTED.

                R -  TO RETURN TO THE TEST CATEGORY SELECTION MENU.



&123R%
$31


        VT78 CPU TEST

        THE FOLLOWING HARDWARE WILL BE TESTED:
        -CPU                    -MEMORY EXTENSION
        -REAL TIME CLOCK        -SLU (SERIAL LINE UNIT)
        -BAUD RATE SWITCH       -PARALLEL I/O INTERFACE
        -RX01/RX02 DISK INTERFACE

        WARNING:  THE DIAGNOSTIC DISKETTE MUST BE IN DRIVE 0.  THIS
        TEST MAY BE STARTED BY PRESSING THE <RETURN> KEY.  THE TEST
        WILL PROCEED THROUGH MULTIPLE PASSES, INDEFINATELY OR UNTIL
        CTRL-C IS ENTERED AT THE CONSOLE.    NOTE:  IF A PRINTER IS
        CONNECTED, TURN THE PRINTER POWER OFF.

            +---------------------------------------------+
            !   YOU MAY HAVE TO TYPE CTRL-C MANY TIMES    !
            !  AS THE KEYBOARD IS NOT POLLED VERY OFTEN.  !
            +---------------------------------------------+

        >PRESS <RETURN> TO START THE TEST.
        >PRESS "R" TO RETURN TO THE TEST CATEGORY SELECTION MENU.
&R
%
$32







        VT78 CPU TEST
        -------------

        CTRL-C ENTERED: END OF TESTING.

        TO RETURN TO THE TEST CATEGORY SELECTION MENU, TYPE <RETURN>.







&
%
$35




        LQP8 PARALLEL PRINTER TEST


        SYSTEM CHOSEN: #1


        SELECT WHICH PRINTER TO TEST:

        TYPE:
                1 -  FOR PRINTER NUMBER 1   (DEVICE CODE 50)

                2 -  FOR PRINTER NUMBER 2   (DEVICE CODE 51)

                3 -  FOR PRINTER NUMBER 3   (DEVICE CODE 52)

                4 -  FOR PRINTER NUMBER 4   (DEVICE CODE 53)

                R - TO RETURN TO THE TEST CATEGORY SELECTION MENU.


&1234R%
#1
WS78
WS100 OR WS102
WS81, WS82, WS211, WS212, OR WS202
WS200
$&
$